Dodge Automatic Transmission Plug Adapter
1 itemFind an A-Premium automatic transmission plug adapter for a leaking or damaged connector. Choose the right replacement for a secure electrical connection.
- All filters
- Sort By
- Year
- Model
- Price
- Brand
- Material
- Warranty
What is an automatic transmission plug adapter?
An automatic transmission plug adapter is an electrical pass-through connector that links the external transmission wiring harness with electrical components inside the transmission. Depending on the transmission design, the adapter also helps seal the connector opening against transmission fluid.
A transmission connector plug adapter is application-specific rather than universal. Vehicle fitment, transmission family, connector shape, indexing tabs, pin interface, seal location, and OE reference can all affect compatibility. Start with the exact vehicle and transmission, then compare the removed adapter with the listed specifications and interchange numbers.
How to identify the right transmission plug adapter
Two transmission plug adapters can look similar from the outside but use different keying, seals, or electrical interfaces. Use the vehicle fitment information first, then verify the details that can separate one transmission application from another.
| Check | What to verify | Why it matters |
|---|---|---|
| Vehicle fitment | Year, make, model, trim, and engine where required | The same vehicle line may use more than one transmission or connector configuration. |
| Transmission identification | Transmission family, code, case tag, or service information | Year, make, and model alone may not distinguish between different transmission units. |
| Connector design | Pin interface, outer shape, indexing tabs, and locking features | A similar-looking housing can still use incompatible keying or terminal alignment. |
| Seal arrangement | Seal location, condition, and replacement configuration | An incorrect, damaged, or poorly seated seal can allow transmission fluid to leak around the connector. |
| OE or interchange number | Compare the complete reference number when available | A matching reference number provides an additional fitment check beyond visual comparison. |
| Package contents | Confirm the adapter and any stated seals or included components | A plug adapter does not automatically include a conductor plate, filter, gasket, harness, or other service parts. |
13-pin transmission plug adapters for 722.6 and NAG1 applications
The reference numbers associated with the current A-Premium transmission plug adapter are commonly used for a 13-pin connector adapter found on selected 722.6 and NAG1 automatic transmission applications. The 722.6 is a five-speed automatic transmission family used in a range of Mercedes-Benz vehicles, while NAG1 terminology is commonly used for related applications in selected Chrysler and Dodge vehicles.
Do not identify a transmission from the connector appearance alone. Confirm the vehicle and transmission information before using 722.6, NAG1, or 13-pin terminology as a fitment match, especially when the same model year may have more than one drivetrain configuration.
Automatic transmission plug adapter vs. conductor plate
A transmission connector plug adapter and a conductor plate are related to the same electrical system, but they are different parts and solve different problems.
| Part | Location and function | What can point to a problem |
|---|---|---|
| Transmission plug adapter | Forms the electrical pass-through connection between the external harness and the transmission while supporting the connector seal. | Cracked housing, damaged lock or keying, fluid seepage around the connector, or contamination at the terminal interface. |
| Transmission conductor plate | Located inside the transmission and routes electrical signals between internal sensors, solenoids, and the transmission control system. | Internal sensor, circuit, or transmission electrical faults that diagnosis traces beyond the external connector. |
Replacing the external adapter will not repair an internal conductor-plate fault. If diagnosis points inside the transmission, identify the transmission code before comparing transmission conductor plates.
Signs that a transmission connector plug needs inspection
A transmission fault code alone does not prove that the plug adapter has failed. Inspect the connector and surrounding area when symptoms suggest a leak or connection problem.
- Transmission fluid seeping around the connector or adapter seal area.
- Fluid contamination inside the electrical connector or on the harness-side terminals.
- Cracks, distortion, or damage to the adapter housing.
- Broken or worn locking features that prevent the connector from seating securely.
- Terminal corrosion or connection problems found during circuit diagnosis.
Clean the area before locating the source of a leak. Low voltage, damaged wiring, terminal corrosion, conductor-plate faults, solenoid problems, and other internal transmission issues can produce overlapping electrical symptoms, so diagnose the circuit before replacing the visible connector.
Transmission plug adapter reference and interchange numbers
Part numbers are useful when the removed adapter is still readable. The current A-Premium automatic transmission plug adapter is associated with the following references. Always confirm vehicle and transmission fitment in addition to the number.
| Reference type | Number |
|---|---|
| A-Premium part number | APTPA00253 |
| Interchange reference | 917-505 |
| OE reference | 2035400253 |
| OE reference | 68021352AA |
Frequently Asked Questions (FAQ)
What does an automatic transmission plug adapter do?
It provides the electrical pass-through connection between the external transmission wiring harness and electrical components inside the transmission. On applicable designs, the adapter and its seal arrangement also help prevent transmission fluid from leaking through the connector opening.
Is a transmission plug adapter the same as a conductor plate?
No. The plug adapter is the connector interface at the transmission case, while the conductor plate is an internal electrical component associated with transmission sensors and solenoids. A leaking or damaged adapter and an internal conductor-plate fault require different diagnosis and replacement parts.
Why is transmission fluid leaking from the electrical connector?
Fluid around the connector can come from a damaged adapter, worn or incorrectly seated seals, an installation problem, or a nearby transmission leak. Clean the area first, inspect the adapter and seal location, and check whether fluid has traveled into the harness-side connector before deciding which part has failed.
How do I know if a 13-pin transmission connector fits my vehicle?
Confirm the exact vehicle and transmission first, then compare the connector shape, keying, seal arrangement, and available OE or interchange numbers. A 13-pin appearance by itself is not enough to confirm fitment because similar connectors may be used with different transmission applications.
What is a 722.6 or NAG1 transmission connector plug?
It commonly refers to the 13-pin adapter plug used at the electrical connector on compatible 722.6-family transmissions and related NAG1 applications. Because transmission usage varies by vehicle configuration, verify the transmission code and fitment data rather than assuming every Mercedes-Benz, Chrysler, or Dodge vehicle uses the same plug.
