Bracket Kit

【Note-1】This item Only fit Small Block with Long Water Pump, Not Short Water Pump.
【Note-2】It is Bright machining Finished made from 9/16" aluminum 6061 T6.
【Note-3】Works with Electric or Mechanical Water Pump with Long Water Pump Pulleys.
【Note-4】Mounts Saginaw P Series Power Steering pump w/Keyway low on driver side.

【Note-1】 This item only fits Big Blocks With Long Water Pump Engine, Not Short Water Pump.
【Note-2】 This item Works with Saginaw key-way Style Power Steering Pumps.

【Note-1】This item Only fit Small Block with Short Water Pump, Not Long Water Pump.
【Note-2】Mounted On Drivers Side Front Using Water Pump Holes & Front 2 Holes Of Header /Exhaust Manifold.
【Note-3】It Mounts With Or Without Headers & Will Work With Stock Rams Horns Exhaust Manifolds As Well.

【Note-1】This item only Fits Big Block Engine Only, Not Small Block.;
【Note-2】This item Works With 1 Wire Alternator (6.6 Inches or 168 mm Between Center Holes).;
【Note-3】It Will Require To Drill The Alternator Upper Hole To Make Clearance For 7/16 Bolt.;
【Note-4】If you are using an alternator set up only , a special alternator pulley is require BBF-P-47.

Alternator Bracket Kit -- Not To Be Used In Conjunction With Power Steering Due To Belt Interference With The Power Steering Pump, Only fits Small Block with Short Water Pump, Not Long Water Pump.

This item Only fits Big Block with Short Water Pump, Not Long Water Pump.

Alternator Bracket Kit -- Mounts On Upper Passenger Side, 90 Degree Water Neck Required.

This item Only fits Big Block Engine with Long Water Pump, Not Short Water Pump.

【Note-1】 This item only fits Small Block Engine, Not Big Block Engine.
【Note-2】 This item only fits the vehicle With Reverse Rotation Water Pumps.
【Note-3】 This item does not come with Idler/Tensioner Pulley.
【Note-4】 Depending on the timing cover, some of the bracket spacers may need to be trimmed to align properly.

This item Only fits Small Block with Short Water Pump, Not Long Water Pump.

【Note-1】 This item only fits the vehicle with Small Blocks Engine, not Big Blocks.
【Note-2】 Does Not Work With Factory A/C Bracket.

【Note-1】 This item only fits Small Block with Long Water Pump, Not Short Water Pump.
【Note-2】 This item comes with standard size alternators.
【Note-3】 Bolts on to three water pump accessory holes and one head accessory hole.
【Note-4】 Crank pulley spacer included for correct alignment.

【Note-1】 This item comes with Tensioning Rod.
【Note-2】 This item only fits the vehicle with Passenger Side of Engine.

This item Only fits Big Block with Long Water Pump, Not Short Water Pump.

【Note-1】 This item only fits Big Block with Long Water Pump, Not Short Water Pump.
【Note-2】 This item Requires 1973+ Heads With 3/8" Bolt Hole.
【Note-3】 This item comes with Mid Mount Alternator Bracket.
【Note-4】 This item Works With Alternator, 6 And 12 O'Clock: Measures 6 5/8" ( 6.6" Or 168 mm) From The Center Of The Pivot Hole To The Center Of The Adjusting Hole.

【Note-1】 This item only fits Small Block Engine, Not Big Block.
【Note-2】 This item comes with Stock Style Bracket.
【Note-3】 Holes Center To Center Measure 2 3/8", 3 5/8" And 4 5/8".
【Note-4】 The Adjustment Arm Slot Is 2 3/4".
【Note-5】 The Total Length of The Adjustment Arm Is 10 3/8".

This item only fits Small Block with Short Water Pump, Not Long Water Pump.

【Note-1】 This item only fits Small Block Engine, Not Big Block.
【Note-2】 Mounts On Passenger Side Using Cylinder Head & Water Pump Bolts.
【Note-3】 This item comes with Stock Style Bracket.
【Note-4】 This item comes with Upper Bracket & Lower Arm.

【Note-1】 This item only works With Lower Hose (Inlet) Connection On The Drivers Side.
【Note-2】 This item Must Be Used With a 90 Degree Water Neck.

This item fits Small Block Engine with Long water Pump Only, Not Short Water Pump.