Chrysler brake rotor and pad kits simplify purchasing discs and pads for the same repair. Front-and-rear combinations can use different rear rotor sizes, and some minivan applications have specific brake-package requirements. Match the complete vehicle configuration, then choose the set with the appropriate components and accessories.
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUTChrysler brake rotor and pad kits can use different rear-disc sizes even when the front-disc dimension looks familiar. Minivan brake-package conditions add another selection boundary alongside the axle being repaired. A front-and-rear set is therefore a particular pairing of components, not a universal group of four discs. Match the existing brake arrangement at both ends of the vehicle, then compare the pads, fitting accessories and quantities supplied with the selected combination.
A full set has to match two axle assemblies. Similar front-disc specifications can appear in packages that use different rear discs and pads. Choosing by the front rotor alone can therefore leave the rear part of the package wrong for the vehicle, even though the first dimension appears correct.
Across Chrysler kit options, a similar front-disc specification can be paired with different rear-disc diameters and corresponding pads. Compare the rear measurements and brake-package notes as part of the complete set. Rotor height and thickness also affect where the friction faces sit within the caliper. This is why a four-wheel kit should be selected as a matched combination for the vehicle, rather than by its front rotors alone.
A heavy-duty brake condition identifies a specific brake arrangement that must be matched. It does not mean that any larger-looking replacement package is an acceptable alternative to the existing parts. Caliper configuration and the required disc can be linked within an application's compatibility conditions.
Some Chrysler rear kits specify heavy-duty brakes identified by a two-piston front caliper. The front-caliper detail helps distinguish the factory brake package, even though the purchase supplies rear friction parts. Check that condition against the vehicle's equipment. Replacement calipers are a separate purchase unless they are named in the kit contents.
The contents list separates discs and pads by axle. A rear-only combination may contain two rotors and four individual pads, while a front-and-rear combination supplies the friction parts for both axles. Those numbers do not tell you whether every fitting accessory or indicator is present.
Pad wear indicators vary across Chrysler combinations. Some sets list no sensor, while certain rear kits include a mechanical indicator on the pads. That indicator warns about pad wear; it serves a different purpose from fitting clips or lubricant. Check these accessories individually, and have the retained supports inspected when the old pads are removed so that the job includes any worn fitting parts.
Ceramic refers to the pad compound, while cast iron describes the rotors in these Chrysler combinations. Those are separate components with separate material specifications. A ceramic-pad kit does not require a carbon-ceramic disc. The pad shape, axle and brake configuration still determine which combination belongs on the vehicle.
The axles can reach their service limits at different times, so inspection should determine whether one axle or both need friction-part replacement. A larger package does not prove that all its components are needed immediately. Assess both sides of the affected axle and use the relevant thickness and condition requirements.
A sticking caliper needs diagnosis of the piston, slides and related components before new friction parts are fitted. If replacement calipers are required, Chrysler brake kits with calipers provide another package type to compare. Choose that broader repair scope because of the diagnosed fault, rather than assuming every worn pad needs a new caliper.
Nominal thickness describes a new disc dimension. Minimum or discard thickness identifies a service limit for the corresponding disc. Compare an inspected rotor with the applicable limit, not simply with the thickness of a new replacement; also assess its surface condition and any damage before deciding it can remain in service.
The rotor-and-pad combinations described here supply friction parts, not wheel-hub bearing assemblies. A bearing complaint needs its own inspection. Noise, looseness or a sensing fault may require other work, but replacing the pads and discs does not establish that a wheel bearing has failed or that it has been renewed.
Plan your 2026 brake replacement with accurate parts-only budgets: $75–$350 per axle or $150–$700 for all four wheels. Learn when to replace vs. resurface rotors, compare kit values, and get tips to save on pads and rotors without compromising safety.
Learn if brake fluid must be changed when replacing pads or rotors. Understand the difference between fluid exchange and bleeding, plus safety tips for DIY repairs.
Never pour water on hot rotors—it causes thermal cracks. Instead, reduce speed, use engine braking, and pull over to let them cool naturally. Learn to spot fade signs, handle emergencies safely, and know when professional inspection is required.
New brakes smoking? Don’t panic. Light smoke is usually normal during the first 50 miles as new parts cure. This quick guide breaks down the 6 real causes and how to troubleshoot a dangerous mechanical failure like a pro.
Properly bedding in your new A-Premium brake pads and rotors is the essential final step to ensure your vehicle achieves peak stopping performance and long-term durability on the road.