2017 Mitsubishi Lancer Retainer Clip Fastener Kit

Car retainer clips secure bumper covers, fender liners, splash shields, engine undercovers, door panels, and other trim. The correct fastener must match both the vehicle and the exact mounting point; two clips that look alike can have different dimensions or locking designs. Start by selecting the year, make, model, trim, and engine when requested, then review the listed installation position and product notes. Keep an undamaged original clip for comparison when possible.

Common Uses for Automotive Retainer Clips

Automotive retainers hold panels in alignment while allowing service access without permanent bonding. Exterior applications include bumper covers, wheel-well liners, splash shields, underbody panels, grilles, and cowl trim. Interior designs may secure door panels, carpet, trunk trim, or molding. Heat, vibration, road debris, and previous removal can weaken a clip, but a loose panel can also result from a damaged mounting hole or bracket. Inspect both the fastener and the surrounding part before ordering replacements.

Push Rivets, Bumper Clips, and Trim Fasteners

Plastic rivets for cars come in several designs. Many plastic push rivets for cars use a center pin that expands the stem inside the mounting hole. Bumper retainer clips may instead use a screw-type center, a grommet, or another locking profile. Trim fasteners often have broad heads or barbed stems. Nylon retainer clips are common, but some applications use metal or mixed-material fasteners. Names describe general functions, not guaranteed interchangeability, so compare the complete design rather than the label alone.

Match Hole Size, Head Shape, and Material

Hole diameter is only the first sizing check. Also compare head diameter and shape, stem diameter, usable stem length, grip range, material, and locking style. A narrow stem may leave the panel loose, while an oversized stem can be difficult to insert or may damage the hole. A short clip may not capture all panel layers, and a long one may interfere behind the panel. Check for an open or closed end, round or rectangular head, sealing features, and a removable center pin.

Choose the Right Clip Quantity and Fitment

Count missing and damaged fasteners before buying, and allow for clips that may break during careful panel removal. A single-style pack works when one mounting area repeats the same fastener. A multi-style Retainer Clip Fastener Kit may suit several panels, but every included size still needs to be checked. Never assume a broadly labeled or universal kit fits every vehicle. Confirm the application, installation position, dimensions, quantity, included tools, and any OE or interchange references on the selected product page.

Remove and Install Retainer Clips Carefully

Use a trim-removal tool or the method specified for the clip instead of pulling directly on the panel. Release a center pin or screw before extracting an expandable fastener, and support nearby trim to reduce bending. Clean the mounting hole, align all panel layers, and insert the replacement straight without forcing it. Replace clips with cracked heads, stretched stems, or weak locking tabs. After installation, verify that the panel sits flush and does not interfere with moving parts, hot components, tires, or steering movement.

FAQ

How do I determine the correct size for a car retainer clip?

Compare an undamaged original with the product specifications. Check the mounting-hole diameter, head shape and diameter, stem diameter, usable stem length, grip range, and locking design rather than matching color or appearance alone.

What is the difference between a plastic rivet and a push-type retainer?

A plastic rivet commonly uses a center pin to expand its stem, while push-type retainer is a broader term that includes several press-in locking designs. Product names can overlap, so the shape, dimensions, and application are the deciding factors.

Can plastic retainer clips be reused?

Some can be reused if they release cleanly and retain their original shape and locking force. Replace any clip with a cracked head, bent pin, stretched stem, damaged barb, or loose fit.

Do bumpers, fender liners, and splash shields use the same clips?

Not necessarily. Even on one vehicle, these areas may require different hole sizes, stem lengths, head profiles, or locking styles, so verify the exact mounting location and product fitment notes.

Should I buy one clip size or a retainer clip fastener kit?

Choose a single-style pack when you have identified one repeated fastener. Choose a multi-style kit when several panels require different clips, but confirm that the kit contains the correct designs and quantities for each repair.