Chrysler Fifth Avenue A/C Expansion Valve
1 itemUpgrade your vehicle's A/C expansion valve with A-Premium's top-notch options. Experience high performance and long-lasting durability for your ride.
- All filters
- Sort By
- Year
- Price
- Placement on Vehicle
- Brand
- Warranty
A/C Expansion Valves Meter Refrigerant
An A/C expansion valve controls refrigerant entering the evaporator, where refrigerant absorbs heat from cabin air. A thermal expansion valve responds to operating conditions so the evaporator receives an appropriate flow. It is a metering component, not a cabin temperature knob or an air-door actuator.
Some automotive systems instead use an A/C orifice tube with a fixed opening. The two arrangements are not interchangeable upgrades. A replacement should preserve the metering design used by the air-conditioning system.
Block and Other Valve Connections
Expansion valves can use different body layouts and line connections. A block-style valve incorporates passages for the refrigerant connections in one housing; other designs arrange the sensing and metering elements differently. Mounting, sealing faces, and refrigerant-line positions determine how the valve joins the evaporator circuit.
A refrigerant expansion valve needs the specified metering characteristics as well as the correct connections. Use its application and refrigerant specification together when choosing the replacement.
Front and Rear Evaporator Circuits
Vehicles with separate rear cooling can have a second evaporator and its own metering component. The front and rear units can use different valves and line connections. Identify the circuit being serviced before choosing the part or planning access. Access to a rear unit may involve interior panels rather than the same engine-compartment work used at the front. Plan the parts and seals for the affected circuit.
Frequently Asked Questions
Does warm air from the vents prove the expansion valve is faulty?
No. Refrigerant charge, compressor operation, condenser airflow, and air-side faults can all affect cooling. An A/C technician uses pressure and temperature checks under the specified conditions to distinguish these causes before replacing a valve.
Can a blocked expansion valve be flushed clean?
Do not assume so. Metering components generally require replacement when contamination prevents proper operation, and they are not treated as ordinary open hose sections during flushing. The system also needs attention to the contamination source and the prescribed cleanup process.
Must refrigerant be recovered before changing the valve?
Yes. Replacing it opens the refrigerant circuit. Arrange proper recovery and the required leak testing, evacuation, and measured recharge with suitable equipment. Loosening a connection to release refrigerant is not an acceptable preparation step.
Should I adjust a new thermal expansion valve before installing it?
Not unless its manufacturer and the vehicle service procedure explicitly call for adjustment. A replacement valve is not a general tuning control for colder air. Changing a setting without the required measurements can disrupt refrigerant feed.
Are the connection seals included with an expansion valve?
Contents vary by package. Identify the required seals and whether they are supplied before opening the system. Use the specified replacements and lubricant during assembly; reusing a damaged seal can leave the repaired connection leaking.
