A brake kit with hub bearings groups brake friction parts and wheel-end components for a specified repair. The selection includes front-only, rear-only and front-and-rear packages, with contents determined by the individual kit.
Attention to customers from California: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Brake Rotor And Pad Kits With Wheel Bearings
A brake kit with hub bearings groups brake friction parts and wheel-end components for a specified repair. The selection includes front-only, rear-only and front-and-rear packages, with contents determined by the individual kit.
A-Premium offers combinations for selected vehicles. Match the brake configuration and wheel hub application on each axle involved in the repair.
Choosing Brake Kits With Hub Bearings
Front and rear brakes can use different rotor dimensions, construction and pad shapes, while the hub must match its mounting and wheel-speed sensor arrangement. Drivetrain and brake equipment can narrow the fit of a particular kit.
Inspect the itemized contents rather than using total piece count to infer the number of rotors, pads or hubs. Hardware, lubricant and sensors may be included on some products and absent from others.
Frequently Asked Questions (FAQ)
Does a 16-piece brake kit always contain four identical rotors?
A piece count describes the whole package, not identical parts. One A-Premium front-and-rear kit specifies vented front rotors and solid rear rotors, illustrating why each axle's components must be checked separately.
Are drilled or slotted rotors the same as vented rotors?
Vented describes the rotor's internal air passages; drilled and slotted describe features on the braking surfaces. A rotor can have a surface pattern and still use the internal construction specified for its application.
Is an ABS sensor the same as a brake pad wear sensor?
They serve different functions: a wheel-speed sensor supplies information for systems such as ABS, while a pad wear sensor indicates friction-material wear. A kit can include one, both or neither depending on the product.
Does a brake job mean the wheel bearings also need replacement?
Bearings and brake friction parts wear for different reasons. A combined kit can suit a repair involving both, but bearing roughness, looseness or noise should be diagnosed separately from brake wear.
Does front-and-rear fitment remove drivetrain restrictions?
The vehicle configuration still matters. One listed front-and-rear A-Premium kit is limited to rear-wheel-drive models with vented rear rotors; that condition belongs to that particular kit.