Hyundai Brake Rotor and Pad Kits

Hyundai Brake Rotor And Pad Kits By Parking-Brake Type

Hyundai brake rotor and pad kits can distinguish manual and electric parking-brake equipment, particularly when rear parts are included. A full set may specify the manual arrangement, and a build-date limit can further distinguish compatible parts within the same model year. Check those details before comparing the packages. The right choice then depends on the axle coverage, rotor sizes and included fitting items needed to replace the worn friction components on your vehicle.

Build-Date Limits For Hyundai Brake Kits

One Elantra GT application is limited to vehicles built before June 29, 2015.

A production cutoff separates the vehicles covered by that particular replacement, even when their model years overlap. Use the vehicle's build information rather than its registration date to resolve the condition. Keep the cutoff with any other brake-equipment notes on the same fitment entry. This helps distinguish parts around a production change without assuming that every vehicle built in the same model year uses one brake combination.

What A Hyundai Front-And-Rear Brake Kit Supplies

A Hyundai full set contains two front rotors, two rear rotors, four front pads and four rear pads. Those 12 pieces provide friction components for four wheels.

Kit quantities count individual components. Two rotors and four pads can form a complete friction set for one axle, while four rotors and eight pads can cover both axles. Read the front and rear descriptions beside those counts so that each part goes to its intended position. Then check the separate accessory list for clips, indicators and lubricant. This gives you a usable shopping list for the brake job and makes it easier to compare an axle package with a larger combination.

Choosing The Correct Hyundai Brake Rotor Diameter

A rear rotor's diameter is specific to its brake assembly. Front and rear discs may differ in size, and a diameter shared by two rotors does not establish that their thickness or mounting dimensions also match.

Outside diameter is the distance across the rotor's braking surface. It works with the caliper and pad position to place the pad on the intended part of the disc. A front-and-rear package can have different diameters at each axle, so compare both sets of dimensions before ordering. This also explains why a larger rotor is not a simple replacement upgrade: a change in diameter can require other brake components and clearances beyond those provided by an ordinary service kit.

Frequently Asked Questions (FAQ)

Does a drilled and slotted face prove a shorter stopping distance?

The drilled and slotted faces on a replacement rotor are a design feature. They do not, by themselves, establish a shorter stopping distance for the vehicle. Select the required disc construction and size first, then compare supported features of the compatible choices rather than treating a visible pattern as a test result.

Does ceramic describe both the pads and the discs in a package?

Some Hyundai combinations pair ceramic pads with cast-iron rotors. Ceramic names the pad's friction formulation; cast iron names the disc material. They are intended to work together in that application. Neither description changes the required pad shape or turns the disc into a carbon-ceramic rotor.

Why does rotor mounting height matter?

Mounting height positions the disc's working faces relative to the hub and caliper. It is separate from the outside diameter discussed above. A replacement rear rotor must satisfy both measurements, along with its other mounting dimensions, so a disc that slips over the studs is not necessarily in the correct braking position.

Does balancing a disc measure its side-to-side movement?

Balance addresses how mass is distributed around a rotating component. Lateral runout describes side-to-side movement during rotation, and thickness variation is another separate measurement. The appropriate checks establish which condition needs correction; a statement about balance cannot substitute for all the other aspects of disc and hub inspection.

Why are new pads normally fitted with new discs?

New pads provide fresh friction surfaces for the replacement discs. Old pads have worn against their previous rotors and can carry uneven wear into the job. If buying the discs separately, include the matching Hyundai brake pads and plan the prescribed replacement across the affected axle.

Brake Rotor and Pad cost Replacement Cost in 2026

Plan your 2026 brake replacement with accurate parts-only budgets: $75–$350 per axle or $150–$700 for all four wheels. Learn when to replace vs. resurface rotors, compare kit values, and get tips to save on pads and rotors without compromising safety.

Oct 09, 2026

Hyundai Brake Pads and Rotors Kit