Throttle Position Sensor From $11.99

Choosing A Throttle Position Sensor

A throttle position sensor (TPS) sends information about the throttle plate's position to the engine control system. The correct replacement depends on the throttle assembly, mounting and electrical connections used by the vehicle. A-Premium offers separate sensors for selected applications, including designs with different terminal counts.

Compare the specified application and sensor mounting as well as the connector. Some vehicles use a sensor integrated into the throttle body, so determine whether the sensor is serviced separately on the installed assembly.

How A TPS Sensor Supports Engine Control

As the throttle plate moves, the sensor provides a changing position signal to the engine control unit. The control unit uses that information with other inputs to manage engine operation. In an electronic throttle system, the accelerator pedal has its own position signal; pedal movement and throttle plate position are related inputs, not the same measurement.

A faulty signal or connection can affect the information available to the control system. The exact response depends on the vehicle and the nature of the fault.

Throttle Sensor Symptoms And Diagnosis

Hesitation, unstable idle, reduced response or a check-engine light can point toward a throttle-control issue, but these symptoms also have other possible causes. Inspect the sensor connection and wiring and test the signal according to the vehicle's procedure before deciding which part needs replacement.

After repair, follow the specified installation and any learning procedure for that vehicle. A sensor replacement does not correct a damaged connector or a binding throttle plate by itself.

Frequently Asked Questions (FAQ)

Is a throttle position sensor the same as an accelerator pedal sensor?

They measure different positions. The TPS reports throttle plate position, while the accelerator pedal sensor reports pedal position to the control unit. Their signals may be used together in an electronic throttle system, but the parts are not interchangeable.

Can a throttle position sensor be cleaned instead of replaced?

A dirty or corroded electrical connector may be serviceable when the vehicle's procedure permits it, but cleaning the sensor itself is not a universal repair. A damaged sensor or a faulty internal signal may require replacement after diagnosis.

Does a new throttle position sensor always need calibration?

Some throttle systems require an initialization or learning procedure after service; others have different requirements. Use the service instructions for the particular vehicle and component instead of assuming a single procedure applies to every TPS.

Does a throttle-related trouble code prove that the TPS failed?

A code can indicate an incorrect or implausible signal without identifying the failed part. Wiring, connector contact, sensor supply or the throttle mechanism can also be involved. Test the relevant circuit and component before replacing the sensor.

Can terminal count alone identify the right TPS?

Terminal count is useful for comparing connectors, but the mounting, electrical characteristics and specified vehicle application must also match. The collection includes sensors with different terminal counts, and two parts with the same number of terminals are not automatically interchangeable.

Chrysler Throttle Position Sensor

Choosing A Throttle Position Sensor

How A TPS Sensor Supports Engine Control

Throttle Sensor Symptoms And Diagnosis

Frequently Asked Questions (FAQ)

Related Categories

Related Blogs

P0122 Code: Throttle Position Sensor Low Input Causes & Fix

P0123 Code: Throttle Position Sensor High Input Diagnosis and Fixes

P0121 Code: Throttle Position Sensor Range/Performance Problem