Audi Q7 A/C Hose

A/C Hoses Carry Refrigerant Around the System

An A/C hose connects components in the sealed refrigerant circuit. Unlike a coolant hose, it must suit the refrigerant, lubricant, pressure conditions, and fittings specified for that air-conditioning system. Refrigerant-compatible materials and connections are essential to that service.

Air-conditioning lines often combine flexible hose with shaped metal tubing. The flexible section accommodates movement, while the rigid sections follow the intended route and support the connections. Replacing the whole line preserves those relationships when the assembly is designed for the required position.

Suction, Discharge, and Liquid Lines

These names describe different parts of the refrigerant path:

• A suction line carries refrigerant vapor from the evaporator side toward the compressor.
• A discharge line carries hot, pressurized refrigerant from the compressor to the condenser.
• A liquid line carries refrigerant from the condenser side toward the metering component, with other components in the route depending on system design.

The high-pressure and low-pressure sections use their specified line assemblies, with the route and connections appropriate to each position.

Fittings, Service Ports, and Support Brackets

A refrigerant line may incorporate a service port, sensor connection, muffler, or additional branch. These features need to match the intended circuit. A line without a required port cannot be made equivalent by leaving another component disconnected.

Mounting brackets and protective sleeves help keep the hose clear of belts, fans, sharp edges, and hot surfaces. A replacement should sit along its intended route without twisting or forcing the fittings into alignment. The line's supports matter after installation too: a loose assembly can rub against nearby parts even if the end connections initially seal.

Frequently Asked Questions