Nissan Murano Catalytic Converter Replacements
Nissan Murano catalytic converters treat harmful exhaust pollutants. Lost catalyst effectiveness, internal damage or a leaking housing can require replacement. Identify which assembly has failed before choosing parts through A-Premium.
The word rear can describe different locations in a Murano exhaust. AP Emissions distinguishes a rear manifold converter from a rear main converter on 2003-2007 3.5L applications. A-Premium also lists a separate rear-side replacement for selected 2009-2023 Murano applications. Match the year and physical assembly with its emissions requirements rather than relying on rear alone to identify the part.
Why Choose Nissan Murano Catalytic Converters from A-Premium?
Choose the Murano converter through A-Premium around the assembly identified during diagnosis and the joints at that location.
- Install the specified rear assembly at its flanged joints: The described later-model rear replacement has welded inlet and outlet flanges. For its matching application, the assembly connects at those joints rather than requiring a universal body to be fitted into cut pipe. The installer can retain neighboring sections that remain serviceable.
- Renew ineffective catalyst treatment: Active catalyst surfaces promote reactions that reduce harmful exhaust gases. Replacing deteriorated material restores treatment at the failed component. Any contributing engine fault should be corrected to protect the replacement.
- Clear a confirmed internal blockage: Melted or displaced substrate can obstruct the converter. Replacing that unit helps recover flow and engine response affected by the restriction, once diagnosis has located it.
FAQs About Nissan Murano Catalytic Converters
What symptoms can indicate a Murano catalytic converter problem?
A restriction can cause reduced response, and loose internal material can produce a rattle. A catalyst-efficiency warning can also prompt testing. Those symptoms can have other causes, so diagnose the converter and related faults before ordering.
Can I replace a Murano catalytic converter myself?
The job requires safe access, identification of the correct assembly and removal of exhaust connections that may be corroded. Follow the vehicle's repair procedure and use suitable support equipment. If access, seized hardware or diagnosis is beyond your equipment or experience, have a shop perform the repair.
Should Murano oxygen sensors be replaced along with the converter?
Replace sensors shown to be faulty by testing or physical inspection. Serviceable sensors may remain if removal leaves them undamaged and reuse is allowed by the repair procedure. Check threads and wiring before the parts order is finalized.
Can oil consumption harm a new Murano converter?
Oil reaching the exhaust can coat catalyst surfaces and impair treatment. Correct the source of excessive oil consumption as part of the repair. Replacing a damaged converter without addressing that source exposes the new material to the same conditions.