2017 Lincoln Navigator Fuel Injector Kit
3 itemsFuel injector seal kits contain service pieces for a particular injector and fuel-system design. Compare the injector application, seal position and package contents before choosing a kit. A package for one injector may contain a different combination of rings or other pieces from a package intended for several injectors.
- All filters
- Sort By
- Price
- Brand
- Material
- Color
- Warranty
Choosing A Fuel Injector Seal Kit
Fuel injector seal kits contain service pieces for a particular injector and fuel-system design. Compare the injector application, seal position and package contents before choosing a kit. A package for one injector may contain a different combination of rings or other pieces from a package intended for several injectors.
Some products in this category are small seal kits; other injector-related assemblies can have a different repair scope. Check whether the selected product supplies seals, an injector or a conversion assembly rather than treating every kit as the same part.
What Fuel Injector O-Rings Do
Injector seals close the specified joints in the fuel system. The seals must suit their mounting position and the fuel system in which they are used. A damaged seal or an improperly assembled connection can allow fuel to escape, but a leak may also originate elsewhere.
Inspect the injector, mating surfaces and related connections when the system is serviced. Replacing a seal cannot repair a damaged injector body or a fault in another fuel line.
Planning Injector Seal Replacement
Fuel systems retain pressure, and gasoline direct-injection systems use a high-pressure circuit. Follow the vehicle's pressure-release and service procedures before opening a connection. Keep fuel away from sparks, heat and other ignition sources.
The installation method and any special tools depend on the injector and its seals. Use the specified replacement pieces and inspect the completed repair for leaks according to the service procedure.
Frequently Asked Questions (FAQ)
How many injectors can one seal kit service?
The number varies with the package. Some kits are listed for one injector, while others cover several; the number of pieces is not necessarily the number of injectors covered. Check both the contents and the stated coverage.
Are port-injection and direct-injection seals interchangeable?
The injector and sealing arrangements differ. A seal selected for one design should not be assumed to fit the other because the engine has the same number of cylinders. Match the fuel system and the specified seal position.
Can new injector seals cure a rough idle?
New seals address a sealing problem when the seals are the identified cause. Rough idle can also involve injector operation, fuel delivery or other engine faults, so the symptom needs diagnosis before choosing a seal kit.
What should I do if I smell gasoline near the injectors?
A fuel odor can signal a leak and should be investigated promptly. Stop the engine, avoid ignition sources and arrange inspection before continuing to use the vehicle. The odor alone does not identify which connection is leaking.
Can the upper and lower injector seals be swapped?
Seals can differ by position, dimensions or design. Use the parts specified for each location on the injector rather than swapping them because they look similar. Check the installation procedure for any required new seals.
