2019 BMW 740i Rack Boot
3 itemsProtect the steering rack from dirt and moisture with A-Premium rack boots and bellows kits. Replace torn boots before contamination causes more damage.
- All filters
- Sort By
- Price
- Placement on Vehicle
- Brand
- Warranty
Choosing a Rack Boot for the Steering Gear and Vehicle
A rack boot protects the steering rack and inner tie-rod area, so fitment begins with the vehicle and steering gear. Similar accordion-shaped boots can use different end diameters, lengths, and attachment methods. Choose the bellows specified for the steering system rather than selecting by appearance. A multi-vehicle interchange family still requires the same rack dimensions and installation position.
Rack and Pinion Bellows Kit Dimensions to Compare
The inside diameter at each end and the working or overall length are the key physical measurements. Both openings must suit the rack housing and tie-rod side while allowing the bellows to move through the steering range. Use the dimensions for the individual kit; one set of measurements should not be applied to the entire category. A boot that is too loose, tight, short, or long is not an equivalent replacement.
Does the Rack Boot Kit Include Clamps or Hardware?
Some rack and pinion bellows kits include mounting hardware or clamps, while others may supply only the boot or a differently packaged set. Read the included-parts information before planning the repair. If clamps are not named, do not assume they are in the box. Package contents should be considered alongside fitment and dimensions, especially when the existing retaining hardware cannot be reused.
Left-Side, Single, and One-Set Rack Boot Listings
Quantity and position labels are not uniform. A product may be identified for the left or driver side, sold as one piece, or described as one set. Those terms should be read with the vehicle application rather than treated as universal. Determine how many bellows the repair needs and which steering-rack position is being serviced before choosing a single boot or packaged set.
Steering Rack Boot, CV Boot, and Ball-Joint Boot Differences
A steering rack boot covers the rack and inner tie-rod area. It is not a CV boot around a drive-axle joint, a ball-joint dust boot, or a complete rack-and-pinion assembly. These parts can share a flexible bellows appearance but protect different components. Identify the location and system first so a driveline or suspension boot is not mistaken for a steering bellows kit.
Frequently Asked Questions (FAQ)
Is a rack boot the same as a CV boot?
No. A rack boot protects the steering rack and inner tie-rod area, while a CV boot covers a drive-axle joint. Use the component location to choose the correct boot type.
Which rack boot dimensions should I compare?
Use the inside diameter at both ends and the stated working or overall length. Those measurements must suit the steering rack and tie-rod arrangement for the vehicle.
Does every bellows kit include clamps?
No. Hardware inclusion varies. Read the package details for the individual kit and arrange the required clamps separately when they are not identified as included.
Can one rack boot fit many vehicles?
Some interchange families cover multiple vehicles, but the steering gear and dimensions still have to agree. Use the stated application and both end diameters rather than treating the boot as a one-size-fits-all part.
