Chrysler Wheel Spacer

Match Wheel Spacers to the Vehicle and Wheels

A wheel spacer changes the wheel mounting position, so fitment requires more than matching the vehicle name. Enter the year, make, model, trim, and drivetrain, then verify the vehicle-side and wheel-side bolt patterns, center bore, stud or bolt thread, spacer thickness, and lug count. Compare these details with both the hub and wheel. Check all product notes, especially when one model year can use more than one thread specification or wheel configuration.

Lug-Centric, Hub-Centric, and Universal Spacer Terms

A lug-centric spacer is centered through the wheel fasteners, while a hub-centric design also uses a center lip or bore relationship to locate the wheel. Product terminology can vary, so use the listed dimensions and construction rather than the label alone. Universal spacer describes a broader bolt-pattern design; it does not mean the part fits every vehicle or wheel. Also verify whether the wheel has a compatible center opening and mounting surface for the spacer design. The fastener seating style, hub clearance, wheel bore, and available thread engagement must still suit the application.

Clearance Goals and Related Checks

Drivers may consider spacers to change wheel offset or create clearance around suspension or brake components. The selected thickness must address the measured interference without causing the tire or wheel to contact the body, liner, suspension, or steering parts. Check clearance through steering and suspension travel, not only while parked. If the concern involves a changed brake assembly, compare the dimensions of the installed brake calipers and wheels before choosing a spacer. A spacer cannot correct a damaged wheel, hub, or fastener.

Wheel Spacer Fitment Checklist

Confirm bolt pattern on both sides of the spacer, hub and wheel center-bore compatibility, lug count, stud or bolt thread, spacer thickness, wheel fastener seat style, and whether the spacer uses its own studs. Check that the original studs do not protrude into a wheel pocket incorrectly. Review wheel offset, tire size, brake clearance, and fender clearance for the complete setup. Measure the installed components rather than relying on a wheel's visual style, and confirm that aftermarket wheels have the expected bore and pockets. Vehicle and wheel specifications must agree with the product listing; similar-looking spacers are not interchangeable when these dimensions differ.

Installation and Inspection Priorities

The hub and wheel mounting faces must be clean, flat, and free of damage. Follow the vehicle, wheel, and spacer instructions for hardware, tightening pattern, and application-specific fastener values; do not substitute a general setting. Confirm that the spacer seats flush and that the wheel fasteners provide the required engagement without bottoming out. Recheck the assembly as directed by the applicable instructions and inspect for vibration, contact, or loosening. Use a qualified installer when the dimensions or attachment method cannot be verified.

Frequently Asked Questions (FAQ)