Audi brake pads are available for front, rear and combined axle service. Ceramic friction material, pad shape and fitting-hardware contents describe different aspects of each set. Compare the pads for your Audi's installed calipers at A-Premium and choose the coverage that matches the brake work needed.
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUT
SOLD
OUTAudi brake pads can be supplied with fitting hardware for the stated brake application. Front, rear and combined pad sets cover different amounts of work, and accessory contents can differ between them. Match the pad configuration and complete vehicle entry first, then compare the contents needed for the repair. The pad count, hardware and any wear indicator describe separate parts of the order rather than interchangeable measures of coverage.
Selected Audi front-pad sets use ceramic friction material.
The friction compound is the material that contacts the rotor when the brakes are applied. It is attached to a backing plate whose shape fits the caliper and pad supports. These are separate selection details: the compound describes the working material, while the pad's application and dimensions establish its mechanical fit. Once the correct configuration is identified, compare the formulations actually offered for it and their stated features. A material name by itself does not specify a fixed wear life or a tested stopping distance.
A rear-axle pad set serves the driver and passenger sides of the specified rear brake assembly.
The backing plate locates the pad in its supports and transfers the caliper's force to the friction material. Its outline, tabs and contact points must match the installed assembly so the pad sits and moves as intended. Keep the axle and any brake-equipment conditions attached to that configuration. Front and rear pads can differ even within one vehicle, and a similar photograph may conceal a different support shape. Once the mechanical match is established, compare friction formulations and the accessories supplied for that application.
A front-and-rear pad set supplies friction pads for both axles. If inspection shows that the discs also need replacement, compare the required Audi brake rotors separately.
A pad set renews the friction material that presses against the rotor. Before choosing a pad-only repair, have the discs checked for thickness, surface damage and corrosion, and inspect the calipers and guides for proper movement. Uneven wear on the old pads can point to a problem that needs correction alongside the new set. When those surrounding components remain serviceable, the appropriate pad set can cover the repair without adding rotors or hydraulic parts that inspection has not shown to be necessary.
A pad replacement renews the friction material at the wheel while leaving the fluid in the hydraulic circuit. Follow the Audi's fluid-maintenance requirements separately from the pad purchase. If additional work opens a hydraulic connection, the installer must complete the prescribed fluid, bleeding and operation checks. New pads do not establish that the retained hydraulic system is free of faults. For the distinction between these services, see the brake fluid and friction-part replacement guide.
A new pad's new thickness is a component dimension, not a fixed mileage prediction. Wear depends on operating conditions and the state of the brake assembly. Use the applicable inspection requirements and measured remaining friction material to plan later service, including any uneven wear that suggests a retained component needs attention.
A full set listing eight individual pads can cover the front and rear axles. That total does not mean eight complete brakes or eight identical pads. Keep the front and rear groups in their specified positions and check any hardware or wear-indicator inclusions separately from the friction-piece count.
A conversion changes the assembly that replacement parts must match. Original vehicle details alone may no longer identify the fitted discs, pads or calipers. Establish the converted brake system and its component specifications before ordering, rather than assuming that a replacement intended for the factory arrangement will suit the altered equipment.
The two arrangements signal wear differently and need to suit the vehicle's brake system. Check the specified indicator type and whether it is supplied with the selected pads. A mechanical indicator does not replace an electrical connection, and neither should be confused with the wheel-speed sensor used by ABS.
Diagnose uneven brake pad wear by checking sticking calipers, seized guide pins, or trapped pressure. Learn to identify inner vs. outer wear patterns, fix the root cause, and replace pads correctly as an axle set for safety.
Compare 7 top brake pad brands: A-Premium, Bosch, Wagner, PowerStop, Raybestos, Centric, and EBC. Find the best fit for daily driving, towing, or performance based on noise, dust, and value.
This guide breaks down how to check your front and rear brake pads, why you must always replace them in axle sets, and how to decide between a quick pads-only fix or a complete pad and rotor kit.
Plan 2026 brake repairs with accurate costs: $35–$150 per axle for pads. Learn to spot overcharging, assess rotor needs, and save up to 25% on A-Premium parts during Black Friday. Ensure safety and value by matching the right components to your vehicle.
Replace brake pads safely with this step-by-step DIY guide. Learn to secure the vehicle, inspect rotors, retract pistons, install new hardware, and bed in pads for optimal performance. Includes tips for electronic parking brakes and wear sensors.
