Freightliner brake pads can supply one axle or separate front and rear groups in a combined set. Ceramic options have position-specific dimensions and their own fitting contents. Select your van's brake application, then compare pad quantities, wear indicators and supplied lubricant or hardware for the service.
SOLD
OUT
SOLD
OUTFreightliner brake pads can be supplied for one axle or as a front-and-rear set. A full package may contain eight individual pads with different front and rear dimensions, while axle sets have their own accessory contents. Match each group to the installed caliper arrangement before comparing materials. The quantity describes the friction pieces supplied, while hardware, lubricant and wear indicators should each be checked against the work required for the brake assembly.
Selected Freightliner front-pad sets use ceramic friction material.
Brake dust comes from wear as the pads and discs work against each other. A ceramic formulation can still produce particles, so ceramic should not be read as dust-free. Wheel-cleaning preferences can be part of a pad comparison, but the product's own supported features matter more than assumptions about a material family. The condition of the rotor, pad supports and caliper also belongs in the repair assessment. New friction material should be paired with correction of any dragging or uneven-wear problem found during inspection.
A Sprinter full set groups separate front and rear pad configurations. Keep the backing shapes, dimensions and position labels together when preparing the repair, because a front pad's width does not identify the correct rear component. Each pad needs the support arrangement and operating clearance required by its caliper. Check the complete vehicle entry for both axle groups, then compare friction material and service accessories within the suitable applications rather than treating a full set as eight interchangeable pieces.
Some Freightliner front-pad sets include brake lubricant for the permitted fitting locations.
Brake lubricant is used at specified contact or sliding points during assembly. The permitted product and locations depend on the component instructions; the pad friction material and rotor working faces must remain free of grease and oil. A packet supplied with a kit is therefore a service accessory, not a coating for the entire brake. Have binding, contamination or damaged guides corrected as part of the repair. Lubrication should support the intended movement of sound components, rather than conceal a fault that still needs attention.
A front pad set may be supplied without a wear sensor. Pad wear equipment concerns friction-material condition, while ABS uses wheel-speed sensing. Check the indicator arrangement required by the vehicle and any separately needed components, and have an existing warning diagnosed before assuming a new pad set will correct it.
Pad replacement can generally keep the hydraulic hose connected when the vehicle's service procedure permits it. A caliper moved for access needs separate support so its weight does not hang from the hose. Have the installer check the hose condition and routing during the job. If a hose or caliper also needs replacement, account for the separate hydraulic work and the prescribed bleeding and operation checks.
An iron backing plate supports the friction material and provides the required outline. Its material description is separate from the ceramic friction formulation. Read both within the correct pad configuration; neither label alone establishes a measured stopping-distance, noise or dust result.
A pad-only repair can be suitable when the discs meet their thickness and condition requirements and the service procedure permits reuse. If they also need replacement, compare the appropriate Freightliner brake rotors. Inspect the retained calipers and guides so any cause of uneven wear is corrected with the repair.
A shared part can be suitable when its compatibility information includes your Freightliner application. Match the component reference to the Sprinter's exact year, axle and equipment conditions, even when the product title names another make. Keep any exclusion attached to that vehicle entry instead of copying conditions from a different application. If the part number matches but the axle or brake description differs, have those details resolved before ordering the pad set.
Plan 2026 brake repairs: pads cost $35–$150 per axle. Learn to assess rotor needs, spot overcharging, and save 15% on A-Premium parts with Black Friday codes. Ensure safety by matching the right components to your vehicle.
Diagnose uneven brake pad wear by checking sticking calipers, seized guide pins, or trapped pressure. Learn to identify inner vs. outer wear patterns, fix the root cause, and replace pads correctly as an axle set for safety.
Compare 7 top brake pad brands: A-Premium, Bosch, Wagner, PowerStop, Raybestos, Centric, and EBC. Find the best fit for daily driving, towing, or performance based on noise, dust, and value.
This guide breaks down how to check your front and rear brake pads, why you must always replace them in axle sets, and how to decide between a quick pads-only fix or a complete pad and rotor kit.
Replace brake pads safely with this step-by-step DIY guide. Learn to secure the vehicle, inspect rotors, retract pistons, install new hardware, and bed in pads for optimal performance. Includes tips for electronic parking brakes and wear sensors.
